POCO M6 Plus 5G / Redmi 13 5G / Note 13R File Dump | Hang On Logo Fix | F64 Box Tested

29 views

0 downloads

0.0 (0)

Full Specifications

UFS Dump File POCO M6 Plus 5G / Redmi 13 5G / Redmi Note 13R

Overview	For mobile technicians handling dead boot, hard brick, persistent bootloop, or UFS replacement repairs on the POCO M6 Plus 5G, Redmi 13 5G, and Redmi Note 13R (2406ERN9CC), performing a UFS dump write procedure is one of the most important recovery methods.
Compatibility	These smartphone models share the same Qualcomm platform and hardware structure, making this dump file cross-compatible for restoring essential device partitions and boot structure.
Purpose	The dump package is intended for repairing damaged UFS structures, restoring Fastboot access, recovering dead devices, and rebuilding corrupted system partitions.
Testing Environment	The dump was successfully extracted and tested using the F64 Box platform for hardware-level repair operations.

Dump File Information

Compatible Brands	Xiaomi / POCO / Redmi
Supported Models	POCO M6 Plus 5G / Redmi 13 5G / Redmi Note 13R
Board Code	2406ERN9CC
Read By Tool	F64 Box
Chipset Platform	Qualcomm Snapdragon
File Type	UFS Internal Memory Dump
Main Function	Dead Boot Repair, Unbrick, UFS Recovery, Base Partition Restore
File Name	Dump_POCO_M6_Plus_Redmi_13_5G_Note13R_2406ERN9CC_F64.rar
Category	Hardware Repair File

Quick UFS Dump Writing Guide

Step 1	Download the .rar archive package and extract it using the latest version of WinRAR on your PC.
Step 2	Prepare your preferred UFS repair box such as F64 Box, MIPI Tester, EasyJTAG Plus, or Medusa Pro II.
Step 3	Connect to the device UFS IC using Direct ISP UFS pinout access if available, or remove the IC using a Direct BGA method.
Step 4	Run the Identify UFS operation inside the box software.
Step 5 - Important Backup Notice	If the original factory UFS IC is still readable, it is strongly recommended to backup Qualcomm network security partitions including modemst1, modemst2, fsg, fsc, and persist. This step is critical to protect IMEI and Baseband data.
Step 6	After saving the security backup safely, perform Factory Format or Erase on the UFS IC, especially when using a replacement or second-hand chip.
Step 7	Write the dump partitions or LUN data using the extracted F64 dump files into the UFS IC.
Step 8	Wait until the writing process reaches 100 percent. Reinstall the UFS IC onto the motherboard if it was previously removed.
Step 9	Reassemble the phone and attempt to power it on. If the device only vibrates or boots into Fastboot mode, continue with a complete firmware flashing process using MiFlash Tool and the correct regional ROM.
Step 10	Restore the previously backed-up security partitions or QCN data to recover cellular network functionality and Baseband information.

Important Warning

Disclaimer

Hardware modification and low-level UFS memory programming procedures involve significant technical risk. Any permanent hardware failure, dead boot condition, or Baseband loss caused by incorrect execution is entirely the responsibility of the technician performing the repair.

Description

Download the tested File Dump for POCO M6 Plus 5G, Redmi 13 5G, and Note 13R (2406ERN9CC). This tested UFS dump file helps fix Hang On Logo, Bootloop, Auto ON, Dead Boot, stuck logo, and software crash issues. Compatible with F64 Box for software repair and device recovery.

Tags

#POCOM6Plus5G #Redmi135G #Note13R #2406ERN9CC #FileDump #UFSDump #F64Box #BootloopFix #HangOnLogoFix #DeadBootFix #AutoONFix #FlashFile #FirmwareDownload #SoftwareRepair #MobileFlash