Itel A23 Pro L5006C Flash File
Download Itel A23 Pro (L5006C) official stock ROM flash file. Versions available: V038, V037, V036 (Standard), and V032, V026 (Jio India). Powered by Spreadtrum/Unisoc SC9832E with 1GB RAM, 16GB stora...
4 views
0 downloads
Available Downloads
Loading files...
Full Specifications
Itel A23 Pro L5006C Flash File
| Description | Official factory flash package for Itel A23 Pro (model L5006C). Powered by Spreadtrum/Unisoc SC9832E (28nm) chipset with 1GB RAM, 16GB storage, 2400mAh battery, and Android 10 Go Edition. Available in Standard and Jio India versions. Flash using Upgrade Download Tool (Research Download Tool). Perfect for fixing hang on logo, bootloop, dead issue, auto fastboot mode, recovery loop, clearing pattern locks, removing FRP, and resolving all software related problems. |
| Device Name | Itel A23 Pro |
| Brand | Itel |
| Model | L5006C |
| Chipset | Spreadtrum/Unisoc SC9832E (28nm) |
| CPU | Quad-core 1.4GHz Cortex-A53 |
| GPU | ARM Mali-T820 MP1 |
| Operating System | Android 10 Go Edition |
| Available Versions | V038, V037, V036 (Standard), V032, V026 (Jio India) |
| File Format | .PAC (Spreadtrum/Unisoc format) |
| Flash Tool | Upgrade Download Tool (Research Download Tool) |
| ROM Type | Official Stock Firmware (Factory Signed) |
| Working Status | Verified Service Firmware |
Available Firmware Versions
| Latest Standard (V038) | L5006C-F3212-10.0-IN-V038-20220406 - 06 April 2022 - Android 10 Go |
| Standard V037 | L5006C-F3212-10.0-IN-V037-20220125 - 25 January 2022 - Android 10 Go |
| Standard V036 | L5006C-F3212-10.0-IN-V036-20211217 - 17 December 2021 - Android 10 Go |
| Latest Jio Version (V032) | L5006C-F3212R-10.0-IN-V032-20220615 - 15 June 2022 - Jio India |
| Jio Version V026 | L5006C-F3212R-10.0-IN-V026-20211025 - 25 October 2021 - Jio India |
Device Specifications
| Chipset | Spreadtrum/Unisoc SC9832E |
| Manufacturing Process | 28nm HPC+ |
| CPU | Quad-core 1.4GHz Cortex-A53 |
| GPU | ARM Mali-T820 MP1 (600MHz) |
| RAM | 1GB LPDDR3 |
| Storage | 16GB eMMC 5.1 |
| Expandable Storage | Yes (microSD card slot up to 32GB) |
| Battery Capacity | 2400mAh Li-Ion removable |
| Charging Support | 5W standard charging |
| Display | 4.0 inches TFT LCD, 60Hz refresh rate |
| Display Resolution | WVGA 480 x 800 pixels (~233 PPI) |
| Network | 4G LTE (Jio VoLTE), Dual SIM |
| Rear Camera | 2MP with LED flash |
| Front Camera | 0.3MP (VGA) |
| Audio | Single speaker, 3.5mm headphone jack, FM Radio |
| WiFi | Wi-Fi 802.11 b/g/n, hotspot |
| Bluetooth | Bluetooth 4.2 |
| GPS | Yes, with A-GPS |
| USB | microUSB 2.0 |
| Sensors | Accelerometer, Proximity |
| Build | Plastic frame with plastic back |
| Dimensions | 125 x 64 x 10.5 mm |
| Weight | 120g |
| Colors | Black, Blue |
| Launch Year | 2021 |
| Jio Version Note | Jio versions are network-optimized for Jio India |
Flash File Details
| Latest Standard (V038) | L5006C-F3212-10.0-IN-V038-20220406.pac |
| Latest Jio (V032) | L5006C-F3212R-10.0-IN-V032-20220615.pac |
| File Format | .PAC (Spreadtrum/Unisoc package format) |
| Required Tool | Upgrade Download Tool (ResearchDownload.exe) |
| Drivers Required | Spreadtrum USB drivers (SPD drivers) |
| Region | India (IN) |
What This Flash File Fixes
| Hang on Logo | Device stuck on boot logo screen |
| Bootloop Issue | Continuous device restart cycle |
| Dead Issue | Completely non-responsive phone |
| Auto Fastboot Mode | Phone stuck in fastboot mode |
| Auto Recovery Mode | Phone stuck in recovery loop |
| Screen Lock | Remove pattern, PIN, password |
| FRP Lock | Bypass Google account verification lock |
| Software Upgrade | Move to newer builds |
| Software Downgrade | Roll back to previous version |
| System Lag | Fix stutter and performance drops |
| Root Removal | Remove root sign and return to factory state |
| IMEI Repair | Fix null or corrupted IMEI numbers |
| Red/Orange/Yellow State | Fix authentication state issues |
| Warranty Restore | Return to stock to regain official warranty |
Stock ROM Advantages
| Unbrick Device | Revive completely dead or non-responsive phone |
| Fix Bootloop | Stop device stuck endlessly on logo screen |
| Fix Auto Fastboot | Resolve auto fastboot mode issue |
| Fix Auto Recovery | Resolve auto recovery mode issue |
| Version Change | Upgrade to newer build or downgrade to older stable version |
| Root Removal | Remove root sign and return to factory state |
| Bug Elimination | Fix random glitches and system errors |
| Lag Fix | Remove stutter and improve system smoothness |
| Lock Removal | Erase forgotten pattern, PIN, or password |
| FRP Bypass | Remove Google account verification lock |
| IMEI Repair | Restore original IMEI numbers |
| State Fix | Fix red, orange, and yellow state issues |
| Warranty Restore | Return to stock to regain official warranty coverage |
Key Features of Itel A23 Pro
| Android 10 Go Edition | Optimized for entry-level hardware |
| 4-inch Display | Compact screen for easy handling |
| 2400mAh Battery | Removable battery for easy replacement |
| SC9832E Processor | Quad-core processor for basic tasks |
| Dual SIM 4G VoLTE | 4G connectivity with VoLTE support |
| FM Radio | Wireless FM radio support |
| Removable Battery | Easy battery replacement |
| Jio Versions | Optimized for Jio India network |
Standard vs Jio Version Comparison
| Standard Version | L5006C-F3212-10.0-IN - Unlocked for all networks |
| Jio Version | L5006C-F3212R-10.0-IN - Network optimized for Jio India |
| Compatibility | Jio version works best with Jio SIM in India |
| Recommendation | Use region-specific firmware for your device |
| Verification | Check your device region before flashing |
Pre-Flash Requirements
| Battery | Keep charge at 70 percent or above (2400mAh battery) |
| USB Cable | Original Itel USB data cable |
| USB Port | Use direct motherboard USB port (USB 2.0 recommended) |
| Drivers | Install Spreadtrum USB drivers (SPD drivers) |
| Flash Tool | Upgrade Download Tool (ResearchDownload.exe) |
| Backup Warning | All user data will be erased during process |
| Device Model | Confirm your device is L5006C - wrong firmware bricks phone |
| PC OS | Windows 7/8/10/11 64-bit recommended |
| Anti-virus | Disable temporarily to avoid flash tool interference |
| Flashing Knowledge | Basic flashing knowledge required |
Flashing Steps - Upgrade Download Tool (SPD Research Tool)
| Step 1 | Download and install Spreadtrum USB drivers on your computer |
| Step 2 | Download desired firmware version (.PAC file) and Upgrade Download Tool |
| Step 3 | Extract both flash file and tool using 7-Zip or WinRAR |
| Step 4 | Navigate to Upgrade Download Tool folder and run UpgradeDownload.exe as administrator |
| Step 5 | Wait for Research Download Tool interface to load completely |
| Step 6 | Click on 'Load PAC' or 'Settings' icon and select the .PAC file from extracted firmware folder |
| Step 7 | Wait for tool to verify and load the PAC file |
| Step 8 | Ensure the following options are selected: 'Download' mode, 'USB' port |
| Step 9 | Click 'Start Downloading' or green 'Start' button |
| Step 10 | Power off Itel A23 Pro completely |
| Step 11 | Remove and reinsert battery (if removable) |
| Step 12 | Press and hold Volume Up key (or Volume Down key depending on model) |
| Step 13 | Connect USB cable while holding the volume key |
| Step 14 | Device enters SPD Download/BROM mode |
| Step 15 | Tool will detect device automatically |
| Step 16 | Flashing starts automatically - watch progress bar |
| Step 17 | Wait for green checkmark or 'Download Succeeded' message |
| Step 18 | Disconnect USB cable from phone |
| Step 19 | Press Power button to reboot device |
| Step 20 | First boot takes 3-5 minutes - be patient |
| Step 21 | Set up device - all done |
Quick Flashing Summary
| Step 1 | Install Spreadtrum USB drivers |
| Step 2 | Download flash file (.PAC) and Upgrade Download Tool |
| Step 3 | Extract both files |
| Step 4 | Run Upgrade Download Tool |
| Step 5 | Load PAC file |
| Step 6 | Click Start button |
| Step 7 | Connect powered-off phone (hold volume key) |
| Step 8 | Wait for success message - all done |
SPD/Spreadtrum Download Mode Detection
| Screen State | Blank black screen or Download mode screen |
| Device Manager | Look for 'SPRD U2S Diag' or 'Spreadtrum USB Device' |
| Driver Issue | Unknown device shows when drivers missing |
| Key Combo | Usually Volume Up key or Volume Down key |
| Battery Check | Remove and reinsert battery before connecting |
Troubleshooting Common Errors
| Device Not Detected | Reinstall SPD drivers, try different USB port, remove/reinsert battery |
| PAC File Error | Redownload firmware file - may be corrupted |
| Download Failed | Check USB connection, disable antivirus, run tool as admin |
| S_DL_GET_DRAM_SETTING_FAIL | Try different USB port, reinstall drivers |
| S_DL_PC_BAUD_RATE_MISMATCH | Use different USB cable, try USB 2.0 port |
| Driver Not Installed | Install Spreadtrum USB drivers manually from device manager |
Important Warnings Before Flashing
| Warning 1 | Please backup all personal data before starting flashing process |
| Warning 2 | Logout from Itel/Google cloud service account before flashing |
| Warning 3 | Turn off Find My Device or phone tracking feature |
| Warning 4 | Battery should be charged up to 70 percent minimum |
| Warning 5 | Use original Itel USB cable for stable connection |
| Warning 6 | Android 10+ software versions cannot be rolled back to older Android |
| Warning 7 | Rollback attempt will cause phone not to turn on |
| Warning 8 | Never disconnect USB cable during active flash operation |
| Warning 9 | Use correct firmware for L5006C model only |
| Warning 10 | Disable antivirus temporarily before flashing |
| Warning 11 | For Jio versions, use Jio-specific firmware for best network compatibility |
| Warning 12 | Do not interrupt flashing process - can permanently brick device |
Disclaimer
| Risk Statement | Flashing or unlocking operations are performed at your own risk |
| No Liability | We are not responsible for any mistakes that brick your device |
| Read Instructions | Review all flashing steps carefully before beginning the process |
| Correct File | Use firmware intended only for L5006C model |
| Driver Check | Ensure Spreadtrum drivers are properly installed |
| No Interruption | Do not disconnect USB cable or close tool during flashing |
| Warranty Void | Flashing may void device warranty |
| PAC Warning | Only use .PAC files with Upgrade Download Tool |
Download Information
| Provider | RomWala |
| Latest Standard (V038) | L5006C-F3212-10.0-IN-V038-20220406.pac - Google Drive Link |
| Standard V037 | L5006C-F3212-10.0-IN-V037-20220125.pac - Google Drive Link |
| Standard V036 | L5006C-F3212-10.0-IN-V036-20211217.pac - Google Drive Link |
| Latest Jio (V032) | L5006C-F3212R-10.0-IN-V032-20220615.pac - Google Drive Link |
| Jio V026 | L5006C-F3212R-10.0-IN-V026-20211025.pac - Google Drive Link |
| Upgrade Download Tool | Latest version - Included |
| SPD Drivers | Spreadtrum USB drivers - Included |
| Format | .PAC file (Spreadtrum/Unisoc format) |
| Extraction Tool | 7-Zip or WinRAR |
Search Tags
| Tag 1 | Itel A23 Pro Flash File |
| Tag 2 | L5006C Stock ROM |
| Tag 3 | Upgrade Download Tool Guide |
| Tag 4 | Spreadtrum SC9832E Firmware |
| Tag 5 | Itel Unbrick Solution |
| Tag 6 | FRP Bypass L5006C |
| Tag 7 | Pattern Unlock Itel |
| Tag 8 | Dead Boot Repair |
| Tag 9 | SPD Research Tool |
| Tag 10 | Android 10 Go Edition |
| Tag 11 | Jio Phone Firmware |
| Tag 12 | RomWala Flash File Download |
Itel A23 Pro L5006C Flash File - Description & Features
Download Itel A23 Pro (L5006C) official stock ROM flash file. Versions available: V038, V037, V036 (Standard), and V032, V026 (Jio India). Powered by Spreadtrum/Unisoc SC9832E with 1GB RAM, 16GB storage, and Android 10 Go Edition. Flash using Upgrade Download Tool. Fix dead boot, hang on logo, FRP, pattern lock. Direct Google Drive links below.
Tags:
#ItelA23Pro #L5006C #StockROM #UpgradeDownloadTool #Spreadtrum #Unbrick #FRPBypass #ItelFirmware #DeadBootFix #SC9832E
Tags:
#ItelA23Pro #L5006C #StockROM #UpgradeDownloadTool #Spreadtrum #Unbrick #FRPBypass #ItelFirmware #DeadBootFix #SC9832E
Comments (0)