Download FFU F64 backup dump for Samsung eMMC KLMCG2KETM-B041 (64GB eMMC 5.1). 100% tested full partition backup created with F64 Box for dead boot repair, eMMC replacement, and software corruption. F...
| Description | Professional eMMC Full Backup Dump extracted from Samsung KLMCG2KETM-B041 memory chip for dead boot repair, eMMC replacement, partition recovery, and advanced hardware servicing operations |
| Chip Part Number | KLMCG2KETM-B041 |
| Chip Marking | CKTM4R |
| Manufacturer | Samsung |
| Storage Capacity | 64GB |
| eMMC Version | eMMC 5.1 |
| Package Type | BGA-153 |
| Package Size | 11.5mm x 13mm x 1.0mm |
| Interface | HS400 |
| Operating Temperature | -25°C to +85°C |
| File Type | Full eMMC Backup Dump |
| Backup Format | FFU / Full Backup |
| Working Status | Tested Service File |
| Dead Boot Repair | Restore devices with complete boot failure |
| eMMC Replacement | Initialize new or replaced Samsung eMMC chips |
| Unbrick Solution | Recover hard bricked and soft bricked devices |
| Partition Recovery | Restore damaged boot and system partitions |
| Boot Repair | Repair startup related partition corruption |
| Software Recovery | Recover corrupted operating system structure |
| Factory Restoration | Rebuild original memory partition layout |
| Hardware Repair | Useful during motherboard level servicing |
| Memory Technology | Embedded MultiMediaCard |
| Storage Class | 64GB eMMC |
| Protocol | JEDEC eMMC 5.1 |
| Bus Interface | HS400 High Speed |
| Manufacturer | Samsung Semiconductor |
| Package Format | BGA153 |
| Memory Health | Suitable for service and repair operations |
| Compatibility | Supported by most professional eMMC tools |
| UFI Box | Supported |
| EasyJTAG Plus | Supported |
| Medusa Pro | Supported |
| MIPI Tester | Supported |
| F64 Box | Supported |
| eMMC Pro | Supported |
| Direct ISP | Supported |
| BGA Socket | Supported |
| Step 1 | Download and extract the backup package |
| Step 2 | Connect the Samsung eMMC chip using BGA socket or ISP method |
| Step 3 | Open your preferred eMMC servicing tool |
| Step 4 | Perform eMMC identification and health check |
| Step 5 | Backup original security partitions if available |
| Step 6 | Erase damaged memory structure when required |
| Step 7 | Load FFU or Full Backup file into the software |
| Step 8 | Write backup data to the target eMMC chip |
| Step 9 | Verify write operation successfully completed |
| Step 10 | Install the eMMC back onto the motherboard |
| Step 11 | Flash official firmware if required |
| Step 12 | Complete final testing and device verification |
| Recommended Users | Professional mobile hardware technicians |
| Connection Method | Direct BGA or ISP connection |
| Backup Advice | Always backup original partitions before writing |
| Firmware Requirement | May require firmware flashing after dump writing |
| Repair Level | Advanced hardware servicing |
| Data Risk | Existing data will be overwritten during write operation |
| Compatibility Check | Verify chip model before writing backup |
| Disclaimer | All repair procedures are performed at technician responsibility |
| Tag 1 | KLMCG2KETM-B041 |
| Tag 2 | CKTM4R eMMC |
| Tag 3 | Samsung eMMC Dump |
| Tag 4 | 64GB eMMC Backup |
| Tag 5 | FFU Full Backup |
| Tag 6 | Dead Boot Repair |
| Tag 7 | eMMC Replacement File |
| Tag 8 | UFI Supported Dump |
| Tag 9 | EasyJTAG Backup |
| Tag 10 | Hardware Repair File |
Our team is here to assist you
Comments (0)