Download Oppo A1 5G China (PHS110) official flash file version A.07 with ColorOS 13.1 (Android 13). Powered by Qualcomm Snapdragon 695 5G (6nm). 5000mAh battery with 67W fast charging. China domestic ...
| Description | Official factory flash package for Oppo A1 5G China edition (model PHS110) running ColorOS 13.1 based on Android 13. Powered by Qualcomm Snapdragon 695 5G (6nm) chipset with 5000mAh battery and 67W fast charging. China domestic A-series variant. Flash via EDL mode using MSM Download Tool. Perfect for unbricking dead units, clearing pattern locks, removing FRP, fixing boot loops, and repairing all software related issues after failed updates. |
| Device Name | Oppo A1 5G |
| Brand | Oppo |
| Model | PHS110 |
| Region | China (Domestic) |
| Chipset | Qualcomm SM6375 Snapdragon 695 5G (6nm) |
| Operating System | Android 13 |
| User Interface | ColorOS 13.1 |
| Flash File Version | PHS110domestic_11_A.07_2023052018420112 |
| Build Version | A.07 |
| Build Date | 20 May 2023 |
| RAM Options | 8GB / 12GB LPDDR4X |
| Storage Options | 256GB UFS 2.2 |
| Expandable Storage | Not available (no SD card slot) |
| Battery Capacity | 5000mAh Li-Po non-removable |
| Charging Support | 67W SUPERVOOC fast charging |
| Display | 6.72 inches IPS LCD, 120Hz refresh rate |
| Display Resolution | FHD+ 2400 x 1080 pixels |
| Network | 5G SA/NSA Dual SIM |
| Rear Camera | 50MP + 2MP dual camera setup |
| Front Camera | 8MP punch-hole selfie camera |
| Audio | Single speaker with 3.5mm headphone jack |
| Fingerprint | Side-mounted sensor |
| Build | Plastic frame with plastic back |
| File Size | Approx 5-7 GB |
| Flash Mode | EDL (Emergency Download Mode) |
| Flash Tool | MSM Download Tool / OPlus Flash Tool |
| ROM Type | Official Stock Flash File (China Domestic) |
| Working Status | Verified Service Firmware |
| Full Package Name | PHS110domestic_11_A.07_2023052018420112 |
| Formatted Name | PHS110domestic-11-A.07-2023052018420112 |
| Build Version | A.07 |
| Build Timestamp | 2023052018420112 |
| Build Date | 20 May 2023 |
| Region | China (Domestic) |
| Android Version | 13 |
| ColorOS Version | 13.1 |
| File Format | EDL flashable package (OFP/EDL format) |
| Required Tool | MSM Download Tool or OPlus Flash Tool |
| Authentication | May need authorized service account credentials |
| Chipset | Qualcomm Snapdragon 695 5G |
| Manufacturing Process | 6nm |
| CPU | Octa-core (2x2.2GHz Kryo 660 Gold + 6x1.7GHz Kryo 660 Silver) |
| GPU | Adreno 619 |
| RAM Options | 8GB / 12GB |
| Storage | 256GB |
| Expandable Storage | Not available |
| Battery Capacity | 5000mAh |
| Charging Support | 67W SUPERVOOC |
| Display | 6.72 inch IPS LCD 120Hz FHD+ |
| Network | 5G SA/NSA Dual SIM |
| Operating System | Android 13 |
| Custom UI | ColorOS 13.1 |
| Rear Camera | 50MP + 2MP |
| Front Camera | 8MP |
| Fingerprint | Side-mounted |
| Dead Unit | Revive completely non-responsive device |
| Boot Hang | Stop endless logo cycling at startup |
| Screen Lock | Remove pattern, PIN, password, or fingerprint |
| FRP Lock | Bypass Google account verification lock |
| Software Upgrade | Move to newer ColorOS 13.1 builds |
| Software Downgrade | Roll back to previous version if needed |
| System Lag | Fix stutter and performance drops |
| Root Removal | Return to factory state after rooting |
| Warranty Return | Restore stock for official warranty support |
| Unbrick Device | Revive completely dead or non-responsive phone |
| Fix Bootloop | Stop device stuck endlessly on logo screen |
| Version Change | Upgrade to newer build or downgrade to older stable version |
| Root Removal | Remove root access and return to factory state |
| Bug Elimination | Fix random glitches and system errors |
| Lag Fix | Remove stutter and improve system smoothness |
| Lock Removal | Erase forgotten pattern, PIN, or password |
| FRP Bypass | Remove Google account verification lock |
| Warranty Restore | Return to stock to regain official warranty coverage |
| Snapdragon 695 5G | 6nm efficient processor with 5G support |
| 5000mAh Battery | Large battery capacity for all-day usage |
| 67W SUPERVOOC Charging | Ultra-fast charging - full charge in minutes |
| 120Hz Display | 6.72 inch FHD+ IPS LCD with 120Hz refresh rate |
| 50MP Camera | Dual camera setup with 50MP main sensor |
| 5G Connectivity | Next generation network connectivity |
| ColorOS 13.1 | Feature-rich interface based on Android 13 |
| Side Fingerprint | Convenient side-mounted fingerprint sensor |
| Check Version First | Dial *#899# from emergency call screen to verify current build |
| Battery | Keep charge at 60 percent or above (5000mAh battery) |
| USB Cable | Original or high-quality data sync cable |
| USB Port | Use direct motherboard USB port for stability |
| Drivers | Install Oppo QcomMTK drivers on your computer |
| Flash Tool | MSM Download Tool or OPlus Flash Tool |
| Authorization | EDL access may require authorized service account |
| Backup Warning | All user data will be erased during process |
| Device Model | Confirm your device is PHS110 - wrong firmware bricks phone |
| PC OS | Windows 10 or 11 64-bit recommended |
| Step 1 | Download and extract firmware package (ZIP file) using 7-Zip or WinRAR |
| Step 2 | Download and install Oppo QcomMTK drivers on your computer (skip if already installed) |
| Step 3 | Extract MSM Download Flash Tool and run as administrator |
| Step 4 | Wait for tool interface to load completely |
| Step 5 | If firmware not auto-detected, click Browse and select extracted firmware folder |
| Step 6 | Click Start All button to begin flashing process |
| Step 7 | Power off Oppo A1 5G completely |
| Step 8 | Press and hold Volume Up and Volume Down keys together |
| Step 9 | Connect USB cable while holding both keys firmly |
| Step 10 | Device enters EDL 9008 mode (screen stays black) |
| Step 11 | MSM Download Tool will detect device automatically |
| Step 12 | Flashing starts automatically - watch progress bar |
| Step 13 | Wait for Download Complete or Pass success message |
| Step 14 | Disconnect USB cable from phone |
| Step 15 | Hold Power button 15 to 20 seconds to reboot device |
| Step 16 | First boot takes 5 to 10 minutes - be patient |
| Step 17 | All done - device is now restored |
| Step 1 | Open OPlus Flash Tool as administrator |
| Step 2 | Click Import and select extracted firmware folder |
| Step 3 | Click Start All button |
| Step 4 | Power off phone, hold Volume keys, connect USB |
| Step 5 | Wait for flashing to complete |
| Note | May require authorized EDL credentials |
| Screen State | Blank black screen only (no display at all) |
| Device Manager | Look for Qualcomm HS-USB QDLoader 9008 device |
| Driver Issue | QHSUSB BULK shows when drivers missing |
| Key Combo Fail | Some units need test point method |
| Auth Required | May need authorized EDL access |
| Dialer Code | *#899# |
| Usage | Dial from emergency call screen to check current firmware version |
| Purpose | Verify device version before flashing to ensure compatibility |
| Region | China Domestic |
| Google Services | May not include full Google Play Store or GMS |
| Language | Default Chinese, English available |
| Bloatware | Includes China-specific apps |
| Global Users | May need to install Google services separately after flash |
| OTA Updates | Will receive China region OTA updates only |
| Model Note | PHS110 is China variant - A1 5G with Snapdragon 695 |
| PHS110 | A1 5G China (Snapdragon 695, 67W charging, 120Hz FHD+ display) |
| PHJ110 | A1 Vitality Edition (Dimensity 6020, 33W charging, 90Hz HD+ display) |
| Recommendation | Use model-specific firmware only - do not cross-flash |
| Warning 1 | Please backup all personal data before starting flashing process |
| Warning 2 | Logout from Oppo and Google cloud service account before flashing |
| Warning 3 | Turn off Find My Device or phone tracking feature |
| Warning 4 | Confirm MSM Download Tool is latest version available |
| Warning 5 | Android 10 and newer software versions cannot be rolled back to older Android |
| Warning 6 | Rollback attempt will cause phone not to turn on |
| Warning 7 | Never disconnect USB cable during active flash operation |
| Warning 8 | EDL flashing may require authorized Oppo service credentials |
| Warning 9 | Ensure correct firmware for PHS110 model only |
| Risk Statement | Flashing or unlocking operations are performed at your own risk |
| No Liability | We are not responsible for any mistakes that brick your device |
| Read Instructions | Review all flashing steps carefully before beginning the process |
| Correct File | Use firmware intended only for PHS110 model |
| Driver Check | Ensure Oppo QcomMTK drivers are properly installed |
| No Interruption | Do not disconnect USB cable or close tool during flashing |
| Warranty Void | Flashing may void device warranty |
| Provider | RomWala |
| Package Name | PHS110domestic-11-A.07-2023052018420112 |
| Build Version | A.07 |
| Build Date | 20 May 2023 |
| Android Version | 13 |
| ColorOS Version | 13.1 |
| Region | China (Domestic) |
| Format | ZIP compressed archive |
| Extraction Tool | 7-Zip or WinRAR |
| Includes | MSM Download Tool, Oppo QcomMTK Drivers |
| Direct Link | Provided below |
| Tag 1 | Oppo A1 5G Flash File |
| Tag 2 | PHS110 Stock ROM |
| Tag 3 | ColorOS 13.1 Firmware |
| Tag 4 | Snapdragon 695 Flash File |
| Tag 5 | EDL Mode Flash Oppo |
| Tag 6 | FRP Bypass PHS110 |
| Tag 7 | Pattern Unlock Oppo A1 5G |
| Tag 8 | Dead Boot Repair Qualcomm |
| Tag 9 | MSM Download Tool Guide |
| Tag 10 | Android 13 Oppo Update |
| Tag 11 | 67W Fast Charging Phone |
| Tag 12 | RomWala Flash File Download |
Our team is here to assist you
Comments (0)