Download Oppo A95 (PELM00) official flash file version C.30 with ColorOS 11.1 (Android 11). Powered by Qualcomm Snapdragon 662 (11nm). 5000mAh battery with 33W charging. China domestic variant with SD...
| Description | Official factory flash package for Oppo A95 (model PELM00) running ColorOS 11.1 based on Android 11. Powered by Qualcomm Snapdragon 662 (11nm) chipset with 5000mAh battery and 33W fast charging. China domestic A-series variant with dedicated SD card slot. Flash via EDL mode using MSM Flash Tool. Perfect for unbricking dead units, clearing pattern locks, removing FRP, fixing boot loops, and repairing all software related issues after failed updates. |
| Device Name | Oppo A95 |
| Brand | Oppo |
| Model | PELM00 |
| Also Known As | CPH2365 (Global) |
| Chipset | Qualcomm SM6115 Snapdragon 662 (11nm) |
| Operating System | Android 11 |
| User Interface | ColorOS 11.1 |
| Region | China (Domestic) |
| Flash File Version | PELM00domestic_11_C.30_2022112515270185 |
| Build Version | C.30 |
| Build Date | 25 November 2022 |
| RAM Options | 8GB LPDDR4X |
| Storage Options | 128GB UFS 2.1 |
| Expandable Storage | Yes (dedicated microSD card slot) |
| Battery Capacity | 5000mAh Li-Po non-removable |
| Charging Support | 33W SUPERVOOC fast charging |
| Display | 6.43 inches AMOLED, 60Hz refresh rate |
| Display Resolution | FHD+ 2400 x 1080 pixels |
| Display Protection | Corning Gorilla Glass 5 |
| Network | 4G LTE Dual SIM |
| Rear Camera | 48MP + 8MP + 2MP + 2MP quad camera setup |
| Front Camera | 16MP punch-hole selfie camera |
| Audio | Single speaker with 3.5mm headphone jack |
| Fingerprint | In-display optical sensor |
| Build | Plastic frame with glass back |
| File Size | Approx 4-6 GB |
| Flash Mode | EDL (Emergency Download Mode) |
| Flash Tool | MSM Flash Tool / OPlus Flash Tool |
| ROM Type | Official Stock Flash File (China Domestic) |
| Working Status | Verified Service Firmware |
| Full Package Name | PELM00domestic_11_C.30_2022112515270185 |
| Formatted Name | PELM00domestic-11-C.30-2022112515270185 |
| Build Version | C.30 |
| Build Timestamp | 2022112515270185 |
| Build Date | 25 November 2022 |
| Region | China (Domestic) |
| Android Version | 11 |
| ColorOS Version | 11.1 |
| File Format | EDL flashable package (OFP/EDL format) |
| Required Tool | MSM Flash Tool or OPlus Flash Tool |
| Authentication | May need authorized service account credentials |
| Chipset | Qualcomm Snapdragon 662 |
| Manufacturing Process | 11nm |
| CPU | Octa-core (4x2.0GHz Kryo 260 Gold + 4x1.8GHz Kryo 260 Silver) |
| GPU | Adreno 610 |
| RAM | 8GB |
| Storage | 128GB (expandable via SD card) |
| Battery Capacity | 5000mAh |
| Charging Support | 33W SUPERVOOC |
| Display | 6.43 inch AMOLED |
| Network | 4G LTE Dual SIM |
| Operating System | Android 11 |
| Custom UI | ColorOS 11.1 |
| Rear Camera | 48MP + 8MP + 2MP + 2MP |
| Front Camera | 16MP |
| Dead Unit | Revive completely non-responsive device |
| Boot Hang | Stop endless logo cycling at startup |
| Screen Lock | Remove pattern, PIN, password, or fingerprint |
| FRP Lock | Bypass Google account verification lock |
| Software Upgrade | Move to newer ColorOS 11.1 builds |
| Software Downgrade | Roll back to previous version if needed |
| System Lag | Fix stutter and performance drops |
| Root Removal | Return to factory state after rooting |
| Warranty Return | Restore stock for official warranty support |
| Unbrick Device | Revive completely dead or non-responsive phone |
| Fix Bootloop | Stop device stuck endlessly on logo screen |
| Version Change | Upgrade to newer build or downgrade to older stable version |
| Root Removal | Remove root access and return to factory state |
| Bug Elimination | Fix random glitches and system errors |
| Lag Fix | Remove stutter and improve system smoothness |
| Lock Removal | Erase forgotten pattern, PIN, or password |
| FRP Bypass | Remove Google account verification lock |
| Warranty Restore | Return to stock to regain official warranty coverage |
| Snapdragon 662 | 11nm efficient 4G processor |
| 5000mAh Battery | Large battery capacity for all-day usage |
| 33W SUPERVOOC Charging | Fast charging technology |
| AMOLED Display | 6.43 inch FHD+ AMOLED display |
| 48MP Camera | Quad camera setup with 48MP main sensor |
| In-display Fingerprint | Optical fingerprint sensor under display |
| SD Card Support | Dedicated microSD slot for storage expansion |
| ColorOS 11.1 | Feature-rich interface based on Android 11 |
| Check Version First | Dial *#899# from emergency call screen to verify current build |
| Battery | Keep charge at 70 percent or above (5000mAh battery) |
| USB Cable | Original Oppo USB OG Cable |
| USB Port | Use direct motherboard USB port for stability |
| Drivers | Install Qualcomm USB drivers on your computer |
| Flash Tool | MSM Flash Tool or OPlus Flash Tool |
| Authorization | EDL access may require authorized service account |
| Backup Warning | Take complete backup before flash - all data will be erased |
| Device Model | Confirm your device is PELM00 - wrong firmware bricks phone |
| Flashing Knowledge | Basic flashing knowledge required |
| PC OS | Windows 10 or 11 64-bit recommended |
| Step 1 | Download and extract firmware package (ZIP file) using 7-Zip or WinRAR |
| Step 2 | Download and install Qualcomm USB drivers on your computer (skip if already installed) |
| Step 3 | Extract MSM Flash Tool and double-click to run as administrator |
| Step 4 | Wait for tool interface to load completely |
| Step 5 | If firmware not auto-detected, click Browse and select extracted firmware folder |
| Step 6 | Click Start All button to begin flashing process |
| Step 7 | Power off Oppo A95 completely |
| Step 8 | Press and hold Volume Up and Volume Down keys together |
| Step 9 | Connect USB cable while holding both keys firmly |
| Step 10 | Device enters EDL 9008 mode (screen stays black) |
| Step 11 | MSM Flash Tool will detect device automatically |
| Step 12 | Flashing starts automatically - watch progress bar |
| Step 13 | Wait for Download Complete or Pass success message |
| Step 14 | Disconnect USB cable from phone |
| Step 15 | Hold Power button 15 to 20 seconds to reboot device |
| Step 16 | First boot takes 5 to 10 minutes - be patient |
| Step 17 | All done - device is now restored |
| Screen State | Blank black screen only (no display at all) |
| Device Manager | Look for Qualcomm HS-USB QDLoader 9008 device |
| Driver Issue | QHSUSB BULK shows when drivers missing |
| Key Combo Fail | Some units need test point method |
| Auth Required | May need authorized EDL access |
| Dialer Code | *#899# |
| Usage | Dial from emergency call screen to check current firmware version |
| Purpose | Verify device version before flashing to ensure compatibility |
| Region | China Domestic |
| Google Services | May not include full Google Play Store or GMS |
| Language | Default Chinese, English available |
| Bloatware | Includes China-specific apps |
| Global Users | May need to install Google services separately after flash |
| OTA Updates | Will receive China region OTA updates only |
| Model Note | PELM00 is China variant - Global variant is CPH2365 |
| Warning 1 | Please backup all personal data before starting flashing process |
| Warning 2 | Logout from Oppo and Google cloud service account before flashing |
| Warning 3 | Turn off Find My Device or phone tracking feature |
| Warning 4 | Battery should be charged up to 70% minimum |
| Warning 5 | Use original Oppo USB cable for stable connection |
| Warning 6 | Android 10 and newer software versions cannot be rolled back to older Android |
| Warning 7 | Rollback attempt will cause phone not to turn on |
| Warning 8 | Never disconnect USB cable during active flash operation |
| Warning 9 | EDL flashing may require authorized Oppo service credentials |
| Warning 10 | Ensure correct firmware for PELM00 model only |
| Risk Statement | Flashing or unlocking operations are performed at your own risk |
| No Liability | We are not responsible for any mistakes that brick your device |
| Read Instructions | Review all flashing steps carefully before beginning the process |
| Correct File | Use firmware intended only for PELM00 model |
| Driver Check | Ensure Qualcomm drivers are properly installed |
| No Interruption | Do not disconnect USB cable or close tool during flashing |
| Warranty Void | Flashing may void device warranty |
| Provider | RomWala |
| Package Name | PELM00domestic-11-C.30-2022112515270185 |
| Build Version | C.30 |
| Build Date | 25 November 2022 |
| Android Version | 11 |
| ColorOS Version | 11.1 |
| Region | China (Domestic) |
| Format | ZIP compressed archive |
| Extraction Tool | 7-Zip or WinRAR |
| Hosting | Google Drive / Mediafire (one click download) |
| Includes | MSM Flash Tool, Qualcomm Drivers |
| Direct Link | Provided below |
| Tag 1 | Oppo A95 Flash File |
| Tag 2 | PELM00 Stock ROM |
| Tag 3 | ColorOS 11.1 Firmware |
| Tag 4 | Snapdragon 662 Flash File |
| Tag 5 | EDL Mode Flash Oppo |
| Tag 6 | FRP Bypass PELM00 |
| Tag 7 | Pattern Unlock Oppo A95 |
| Tag 8 | Dead Boot Repair Qualcomm |
| Tag 9 | MSM Flash Tool Guide |
| Tag 10 | Android 11 Oppo Update |
| Tag 11 | CPH2365 Stock ROM |
| Tag 12 | RomWala Flash File Download |
Our team is here to assist you
Comments (0)