Oppo A96 PFUM10 Flash File
Download Oppo A96 (PFUM10) official flash file version A.11 with ColorOS 11.1 (Android 11). Powered by Qualcomm Snapdragon 680 (6nm). 5000mAh battery with 33W fast charging. China domestic variant. Fl...
163 views
1 downloads
Available Downloads
Loading files...
Full Specifications
Oppo A96 PFUM10 Flash File
| Description | Official factory flash package for Oppo A96 (model PFUM10) running ColorOS 11.1 based on Android 11. Powered by Qualcomm Snapdragon 680 (6nm) chipset with 5000mAh battery and 33W fast charging. China domestic A-series variant. Flash via EDL mode using OPlus Flash Tool. Perfect for unbricking dead units, clearing pattern locks, removing FRP, fixing boot loops, and repairing all software related issues after failed updates. |
| Device Name | Oppo A96 |
| Brand | Oppo |
| Model | PFUM10 |
| Also Known As | CPH2493 (Global) |
| Chipset | Qualcomm SM6225-AB Snapdragon 680 (6nm) |
| Operating System | Android 11 |
| User Interface | ColorOS 11.1 |
| Region | China (Domestic) |
| Flash File Version | PFUM10domestic_11_A.11_2022072301160170 |
| Build Version | A.11 |
| Build Date | 23 July 2022 |
| RAM Options | 8GB / 12GB LPDDR4X |
| Storage Options | 256GB UFS 2.2 |
| Expandable Storage | Not available (no SD card slot) |
| Battery Capacity | 5000mAh Li-Po non-removable |
| Charging Support | 33W SUPERVOOC fast charging |
| Display | 6.43 inches AMOLED, 60Hz refresh rate |
| Display Resolution | FHD+ 2400 x 1080 pixels |
| Display Protection | Corning Gorilla Glass 5 |
| Network | 4G LTE Dual SIM |
| Rear Camera | 50MP + 2MP dual camera setup |
| Front Camera | 16MP punch-hole selfie camera |
| Audio | Single speaker with 3.5mm headphone jack |
| Fingerprint | In-display optical sensor |
| Build | Plastic frame with glass back |
| File Size | Approx 4-6 GB |
| Flash Mode | EDL (Emergency Download Mode) |
| Flash Tool | OPlus Flash Tool / MSM Download Tool |
| ROM Type | Official Stock Flash File (China Domestic) |
| Working Status | Verified Service Firmware |
Flash File Details
| Full Package Name | PFUM10domestic_11_A.11_2022072301160170 |
| Formatted Name | PFUM10domestic-11-A.11-2022072301160170 |
| Build Version | A.11 |
| Build Timestamp | 2022072301160170 |
| Build Date | 23 July 2022 |
| Region | China (Domestic) |
| Android Version | 11 |
| ColorOS Version | 11.1 |
| File Format | EDL flashable package (OFP/EDL format) |
| Required Tool | OPlus Flash Tool or MSM Download Tool |
| Authentication | May need authorized service account credentials |
Device Specifications
| Chipset | Qualcomm Snapdragon 680 4G |
| Manufacturing Process | 6nm |
| CPU | Octa-core (4x2.4GHz Kryo 265 Gold + 4x1.9GHz Kryo 265 Silver) |
| GPU | Adreno 610 |
| RAM Options | 8GB / 12GB |
| Storage | 256GB |
| Expandable Storage | Not available |
| Battery Capacity | 5000mAh |
| Charging Support | 33W SUPERVOOC |
| Display | 6.43 inch AMOLED |
| Network | 4G LTE Dual SIM |
| Operating System | Android 11 |
| Custom UI | ColorOS 11.1 |
| Rear Camera | 50MP + 2MP |
| Front Camera | 16MP |
What This Flash File Fixes
| Dead Unit | Revive completely non-responsive device |
| Boot Hang | Stop endless logo cycling at startup |
| Screen Lock | Remove pattern, PIN, password, or fingerprint |
| FRP Lock | Bypass Google account verification lock |
| Software Upgrade | Move to newer ColorOS 11.1 builds |
| Software Downgrade | Roll back to previous version if needed |
| System Lag | Fix stutter and performance drops |
| Root Removal | Return to factory state after rooting |
| Warranty Return | Restore stock for official warranty support |
Stock ROM Advantages
| Unbrick Device | Revive completely dead or non-responsive phone |
| Fix Bootloop | Stop device stuck endlessly on logo screen |
| Version Change | Upgrade to newer build or downgrade to older stable version |
| Root Removal | Remove root access and return to factory state |
| Bug Elimination | Fix random glitches and system errors |
| Lag Fix | Remove stutter and improve system smoothness |
| Lock Removal | Erase forgotten pattern, PIN, or password |
| FRP Bypass | Remove Google account verification lock |
| Warranty Restore | Return to stock to regain official warranty coverage |
Key Features of Oppo A96
| Snapdragon 680 | 6nm efficient 4G processor |
| 5000mAh Battery | Large battery capacity for all-day usage |
| 33W SUPERVOOC Charging | Fast charging technology |
| AMOLED Display | 6.43 inch FHD+ AMOLED display |
| 50MP Camera | Dual camera setup with 50MP main sensor |
| In-display Fingerprint | Optical fingerprint sensor under display |
| ColorOS 11.1 | Feature-rich interface based on Android 11 |
Pre-Flash Requirements
| Check Version First | Dial *#899# from emergency call screen to verify current build |
| Battery | Keep charge at 60 percent or above (5000mAh battery) |
| USB Cable | Original or high-quality data sync cable |
| USB Port | Use direct motherboard USB port for stability |
| Drivers | Install Oppo QcomMTK drivers on your computer |
| Flash Tool | OPlus Flash Tool or MSM Download Tool |
| Authorization | EDL access may require authorized service account |
| Backup Warning | All user data will be erased during process |
| Device Model | Confirm your device is PFUM10 - wrong firmware bricks phone |
| PC OS | Windows 10 or 11 64-bit recommended |
Flashing Steps - OPlus Flash Tool (EDL Mode)
| Step 1 | Download and extract firmware package (ZIP file) using 7-Zip or WinRAR |
| Step 2 | Download and install Oppo QcomMTK drivers on your computer (skip if already installed) |
| Step 3 | Locate and double-click OPlus Flash Tool icon in extracted folder |
| Step 4 | Wait for tool interface to load completely |
| Step 5 | Click Import and select extracted firmware folder containing OFP file |
| Step 6 | Login with Oppo service account credentials (authorized account required) |
| Step 7 | Verify the firmware package before proceeding |
| Step 8 | Click Start All or Flash button to begin |
| Step 9 | Power off Oppo A96 completely |
| Step 10 | Press and hold Volume Up and Volume Down keys together |
| Step 11 | Connect USB cable while holding both keys firmly |
| Step 12 | Device enters EDL 9008 mode (screen stays black) |
| Step 13 | Tool detects phone and begins flashing automatically |
| Step 14 | Watch progress bar move from zero to one hundred percent |
| Step 15 | Wait for Download Complete or Pass success message |
| Step 16 | Disconnect USB cable from phone |
| Step 17 | Hold Power button 15 to 20 seconds to reboot device |
| Step 18 | First boot takes 5 to 10 minutes - be patient |
| Step 19 | All done - device is now restored |
EDL Mode Detection
| Screen State | Blank black screen only (no display at all) |
| Device Manager | Look for Qualcomm HS-USB QDLoader 9008 device |
| Driver Issue | QHSUSB BULK shows when drivers missing |
| Key Combo Fail | Some units need test point method |
| Auth Required | May need authorized EDL access |
Version Check Code
| Dialer Code | *#899# |
| Usage | Dial from emergency call screen to check current firmware version |
| Purpose | Verify device version before flashing to ensure compatibility |
Note About China ROM
| Region | China Domestic |
| Google Services | May not include full Google Play Store or GMS |
| Language | Default Chinese, English available |
| Bloatware | Includes China-specific apps |
| Global Users | May need to install Google services separately after flash |
| OTA Updates | Will receive China region OTA updates only |
| Model Note | PFUM10 is China variant - Global variant is CPH2493 |
Important Warnings Before Flashing
| Warning 1 | Please backup all personal data before starting flashing process |
| Warning 2 | Logout from Oppo and Google cloud service account before flashing |
| Warning 3 | Turn off Find My Device or phone tracking feature |
| Warning 4 | Confirm OPlus Flash Tool is latest version available |
| Warning 5 | Android 10 and newer software versions cannot be rolled back to older Android |
| Warning 6 | Rollback attempt will cause phone not to turn on |
| Warning 7 | Never disconnect USB cable during active flash operation |
| Warning 8 | EDL flashing may require authorized Oppo service credentials |
| Warning 9 | Ensure correct firmware for PFUM10 model only |
Disclaimer
| Risk Statement | Flashing or unlocking operations are performed at your own risk |
| No Liability | We are not responsible for any mistakes that brick your device |
| Read Instructions | Review all flashing steps carefully before beginning the process |
| Correct File | Use firmware intended only for PFUM10 model |
| Driver Check | Ensure Oppo QcomMTK drivers are properly installed |
| No Interruption | Do not disconnect USB cable or close tool during flashing |
| Warranty Void | Flashing may void device warranty |
Download Information
| Provider | RomWala |
| Package Name | PFUM10domestic-11-A.11-2022072301160170 |
| Build Version | A.11 |
| Build Date | 23 July 2022 |
| Android Version | 11 |
| ColorOS Version | 11.1 |
| Region | China (Domestic) |
| Format | ZIP compressed archive |
| Extraction Tool | 7-Zip or WinRAR |
| Includes | OPlus Flash Tool, Oppo QcomMTK Drivers |
| Direct Link | Provided below |
Search Tags
| Tag 1 | Oppo A96 Flash File |
| Tag 2 | PFUM10 Stock ROM |
| Tag 3 | ColorOS 11.1 Firmware |
| Tag 4 | Snapdragon 680 Flash File |
| Tag 5 | EDL Mode Flash Oppo |
| Tag 6 | FRP Bypass PFUM10 |
| Tag 7 | Pattern Unlock Oppo A96 |
| Tag 8 | Dead Boot Repair Qualcomm |
| Tag 9 | OPlus Flash Tool Guide |
| Tag 10 | Android 11 Oppo Update |
| Tag 11 | CPH2493 Stock ROM |
| Tag 12 | RomWala Flash File Download |
Oppo A96 PFUM10 Flash File - Description
Download Oppo A96 (PFUM10) official flash file version A.11 with ColorOS 11.1 (Android 11). Powered by Qualcomm Snapdragon 680 (6nm). 5000mAh battery with 33W fast charging. China domestic variant. Flash via EDL mode using OPlus Flash Tool. Fix dead boot, pattern lock, FRP. Direct link below.
Tags:
#OppoA96 #PFUM10 #ColorOS11 #Snapdragon680 #EDLFlashFile #StockROM #DeadBootFix #FRPBypass #OppoFlashFile #OPlusFlashTool
Tags:
#OppoA96 #PFUM10 #ColorOS11 #Snapdragon680 #EDLFlashFile #StockROM #DeadBootFix #FRPBypass #OppoFlashFile #OPlusFlashTool
Comments (0)