Oppo K9 PEXM00 Flash File
Download Oppo K9 (PEXM00) official flash file version C.06 with ColorOS 11.1 (Android 11). Powered by Qualcomm Snapdragon 768G 5G. 4300mAh battery with 65W fast charging. Flash via EDL mode using MSM ...
95 views
0 downloads
Available Downloads
Loading files...
Full Specifications
Oppo K9 PEXM00 Flash File
| Description | Official factory flash package for Oppo K9 (model PEXM00) running ColorOS 11.1 based on Android 11. Powered by Qualcomm Snapdragon 768G 5G (7nm) chipset with 4300mAh battery and blazing fast 65W charging. China domestic variant with dedicated SD card slot. Flash via EDL mode using MSM Download Tool. Perfect for unbricking dead units, clearing pattern locks, removing FRP, fixing boot loops, and repairing all software related issues after failed updates. |
| Device Name | Oppo K9 |
| Brand | Oppo |
| Model | PEXM00 |
| Also Known As | PEMM00 / CPH2145 (Global) |
| Chipset | Qualcomm SM7250-AC Snapdragon 768G 5G (7nm) |
| Operating System | Android 11 |
| User Interface | ColorOS 11.1 |
| Region | China (Domestic) |
| Flash File Version | PEXM00domestic_11_C.06_2022052510570202 |
| Build Version | C.06 |
| Build Date | 25 May 2022 |
| RAM Options | 8GB LPDDR4X |
| Storage Options | 128GB UFS 2.1 |
| Expandable Storage | Yes (dedicated microSD card slot) |
| Battery Capacity | 4300mAh Li-Po non-removable |
| Charging Support | 65W SuperVOOC fast charging |
| Display | 6.43 inches AMOLED, 90Hz refresh rate |
| Display Resolution | FHD+ 2400 x 1080 pixels |
| Display Protection | Corning Gorilla Glass 5 |
| Network | 5G SA/NSA Dual SIM |
| Rear Camera | 64MP + 8MP + 2MP triple camera setup |
| Front Camera | 32MP punch-hole selfie camera |
| Audio | Single speaker with Dolby Atmos |
| Fingerprint | In-display optical sensor |
| Build | Plastic frame with glass back |
| File Size | Approx 4-6 GB |
| Flash Mode | EDL (Emergency Download Mode) |
| Flash Tool | MSM Download Tool / OPlus Flash Tool |
| ROM Type | Official Stock Flash File (China Domestic) |
| Working Status | Verified Service Firmware |
Flash File Details
| Full Package Name | PEXM00domestic_11_C.06_2022052510570202 |
| Formatted Name | PEXM00domestic-11-C.06-2022052510570202 |
| Build Version | C.06 |
| Build Timestamp | 2022052510570202 |
| Build Date | 25 May 2022 |
| Region | China (Domestic) |
| Android Version | 11 |
| ColorOS Version | 11.1 |
| File Format | EDL flashable package (OFP/EDL format) |
| Required Tool | MSM Download Tool / OPlus Flash Tool |
| Authentication | May need authorized service account credentials |
What This Flash File Fixes
| Dead Unit | Revive completely non-responsive device |
| Boot Hang | Stop endless logo cycling at startup |
| Screen Lock | Remove pattern, PIN, password, or fingerprint |
| FRP Lock | Bypass Google account verification lock |
| Software Upgrade | Move to newer ColorOS 11.1 builds |
| Software Downgrade | Roll back to previous version if needed |
| System Lag | Fix stutter and performance drops |
| Root Removal | Return to factory state after rooting |
| Warranty Return | Restore stock for official warranty support |
Stock ROM Advantages
| Unbrick Device | Revive completely dead or non-responsive phone |
| Fix Bootloop | Stop device stuck endlessly on logo screen |
| Version Change | Upgrade to newer build or downgrade to older stable version |
| Root Removal | Remove root access and return to factory state |
| Bug Elimination | Fix random glitches and system errors |
| Lag Fix | Remove stutter and improve system smoothness |
| Lock Removal | Erase forgotten pattern, PIN, or password |
| FRP Bypass | Remove Google account verification lock |
| Warranty Restore | Return to stock to regain official warranty coverage |
Key Features of Oppo K9
| Snapdragon 768G 5G | 7nm processor with 5G support |
| 4300mAh Battery | Decent battery capacity |
| 65W SuperVOOC Charging | Ultra-fast charging - full charge in 35 minutes |
| 90Hz AMOLED Display | 6.43 inch FHD+ AMOLED with 90Hz refresh rate |
| 64MP Camera | Triple camera setup with 64MP main sensor |
| 5G Connectivity | Next generation network connectivity |
| SD Card Support | Dedicated microSD slot for storage expansion |
Pre-Flash Requirements
| Check Version First | Dial *#899# from emergency call screen to verify current build |
| Battery | Keep charge at 60 percent or above (4300mAh battery) |
| USB Cable | Original or high-quality data sync cable |
| USB Port | Use direct motherboard USB port for stability |
| Drivers | Install Oppo QcomMTK drivers on your computer |
| Flash Tool | MSM Download Tool or OPlus Flash Tool |
| Authorization | EDL access may require authorized service account |
| Backup Warning | All user data will be erased during process |
| Device Model | Confirm your device is PEXM00 - wrong firmware bricks phone |
| PC OS | Windows 10 or 11 64-bit recommended |
Flashing Steps - MSM Download Tool (EDL Mode)
| Step 1 | Download and extract firmware package (ZIP file) using 7-Zip or WinRAR |
| Step 2 | Download and install Oppo QcomMTK drivers on your computer (skip if already installed) |
| Step 3 | Extract MSM Download Flash Tool and run as administrator |
| Step 4 | Wait for tool interface to load completely |
| Step 5 | If firmware not auto-detected, click Browse and select extracted firmware folder |
| Step 6 | Click Start All button to begin flashing process |
| Step 7 | Power off Oppo K9 completely |
| Step 8 | Press and hold Volume Up and Volume Down keys together |
| Step 9 | Connect USB cable while holding both keys firmly |
| Step 10 | Device enters EDL 9008 mode (screen stays black) |
| Step 11 | MSM Download Tool will detect device automatically |
| Step 12 | Flashing starts automatically - watch progress bar |
| Step 13 | Wait for Download Complete or Pass success message |
| Step 14 | Disconnect USB cable from phone |
| Step 15 | Hold Power button 15 to 20 seconds to reboot device |
| Step 16 | First boot takes 5 to 10 minutes - be patient |
| Step 17 | All done - device is now restored |
EDL Mode Detection
| Screen State | Blank black screen only (no display at all) |
| Device Manager | Look for Qualcomm HS-USB QDLoader 9008 device |
| Driver Issue | QHSUSB BULK shows when drivers missing |
| Key Combo Fail | Some units need test point method |
| Auth Required | May need authorized EDL access |
Version Check Code
| Dialer Code | *#899# |
| Usage | Dial from emergency call screen to check current firmware version |
| Purpose | Verify device version before flashing to ensure compatibility |
Note About China ROM
| Region | China Domestic |
| Google Services | May not include full Google Play Store or GMS |
| Language | Default Chinese, English available |
| Bloatware | Includes China-specific apps |
| Global Users | May need to install Google services separately after flash |
| OTA Updates | Will receive China region OTA updates only |
| Model Note | PEXM00 is China variant - Global variant is PEMM00 / CPH2145 |
Important Warnings Before Flashing
| Warning 1 | Please backup all personal data before starting flashing process |
| Warning 2 | Logout from Oppo and Google cloud service account before flashing |
| Warning 3 | Turn off Find My Device or phone tracking feature |
| Warning 4 | Confirm MSM Download Tool is latest version available |
| Warning 5 | Android 10 and newer software versions cannot be rolled back to older Android |
| Warning 6 | Rollback attempt will cause phone not to turn on |
| Warning 7 | Never disconnect USB cable during active flash operation |
| Warning 8 | EDL flashing may require authorized Oppo service credentials |
| Warning 9 | Ensure correct firmware for PEXM00 model only |
Disclaimer
| Risk Statement | Flashing or unlocking operations are performed at your own risk |
| No Liability | We are not responsible for any mistakes that brick your device |
| Read Instructions | Review all flashing steps carefully before beginning the process |
| Correct File | Use firmware intended only for PEXM00 model |
| Driver Check | Ensure Oppo QcomMTK drivers are properly installed |
| No Interruption | Do not disconnect USB cable or close tool during flashing |
| Warranty Void | Flashing may void device warranty |
Download Information
| Provider | RomWala |
| Package Name | PEXM00domestic-11-C.06-2022052510570202 |
| Build Version | C.06 |
| Build Date | 25 May 2022 |
| Android Version | 11 |
| ColorOS Version | 11.1 |
| Region | China (Domestic) |
| Format | ZIP compressed archive |
| Extraction Tool | 7-Zip or WinRAR |
| Direct Link | Provided below |
Search Tags
| Tag 1 | Oppo K9 Flash File |
| Tag 2 | PEXM00 Stock ROM |
| Tag 3 | Snapdragon 768G Firmware |
| Tag 4 | ColorOS 11.1 ROM |
| Tag 5 | EDL Mode Flash Oppo |
| Tag 6 | FRP Bypass PEXM00 |
| Tag 7 | Pattern Unlock Oppo K9 |
| Tag 8 | Dead Boot Repair Qualcomm |
| Tag 9 | MSM Download Tool Guide |
| Tag 10 | Android 11 Oppo Update |
| Tag 11 | PEMM00 Stock ROM |
| Tag 12 | RomWala Flash File Download |
Oppo K9 PEXM00 Flash File - Description
Download Oppo K9 (PEXM00) official flash file version C.06 with ColorOS 11.1 (Android 11). Powered by Qualcomm Snapdragon 768G 5G. 4300mAh battery with 65W fast charging. Flash via EDL mode using MSM Download Tool. Fix dead boot, pattern lock, FRP. Direct link below.
Tags:
#OppoK9 #PEXM00 #Snapdragon768G #ColorOS11 #EDLFlashFile #StockROM #DeadBootFix #FRPBypass #OppoFlashFile #MSMDownloadTool
Tags:
#OppoK9 #PEXM00 #Snapdragon768G #ColorOS11 #EDLFlashFile #StockROM #DeadBootFix #FRPBypass #OppoFlashFile #MSMDownloadTool
Comments (0)