Oppo K9 Pro PEYM00 Flash File
Download Oppo K9 Pro (PEYM00) official flash file version F.10 with ColorOS (Android 11). Powered by MediaTek Dimensity 1200 (6nm). 4500mAh battery with 60W fast charging. Flash via EDL mode using MSM...
89 views
0 downloads
Available Downloads
Loading files...
Full Specifications
Oppo K9 Pro PEYM00 Flash File
| Description | Official factory flash package for Oppo K9 Pro (model PEYM00) running ColorOS based on Android 11. Powered by MediaTek Dimensity 1200 (6nm) chipset with 4500mAh battery and 60W fast charging. China domestic variant with dedicated SD card slot. Flash via EDL mode using MSM Download Tool or SP Flash Tool. Perfect for unbricking dead units, clearing pattern locks, removing FRP, fixing boot loops, and repairing all software related issues after failed updates. |
| Device Name | Oppo K9 Pro |
| Brand | Oppo |
| Model | PEYM00 |
| Also Known As | PEYM10 (India) |
| Chipset | MediaTek Dimensity 1200 (6nm) |
| Operating System | Android 11 |
| User Interface | ColorOS 11.3 |
| Region | China (Domestic) |
| Flash File Version | PEYM00domestic_11_F.10_2023032516080129 |
| Build Version | F.10 |
| Build Date | 25 March 2023 |
| RAM Options | 6GB / 8GB LPDDR4X |
| Storage Options | 128GB UFS 3.1 |
| Expandable Storage | Yes (dedicated microSD card slot) |
| Battery Capacity | 4500mAh Li-Po non-removable |
| Charging Support | 60W SuperVOOC fast charging |
| Display | 6.43 inches AMOLED, 120Hz refresh rate |
| Display Resolution | FHD+ 2400 x 1080 pixels |
| Display Protection | Corning Gorilla Glass 5 |
| Network | 5G SA/NSA Dual SIM |
| Rear Camera | 64MP + 8MP + 2MP triple camera setup |
| Front Camera | 16MP punch-hole selfie camera |
| Audio | Single speaker with Dolby Atmos |
| Fingerprint | In-display optical sensor |
| Build | Plastic frame with glass back |
| File Size | Approx 5-7 GB |
| Flash Mode | EDL/BROM (Preloader Mode) |
| Flash Tools | MSM Download Tool / SP Flash Tool / OPlus Flash Tool |
| ROM Type | Official Stock Flash File (China Domestic) |
| Working Status | Verified Service Firmware |
Flash File Details
| Full Package Name | PEYM00domestic_11_F.10_2023032516080129 |
| Formatted Name | PEYM00domestic-11-F.10-2023032516080129 |
| Build Version | F.10 |
| Build Timestamp | 2023032516080129 |
| Build Date | 25 March 2023 |
| Region | China (Domestic) |
| Android Version | 11 |
| ColorOS Version | 11.3 |
| File Format | Scatter-based flashable package (MTK format) / EDL package |
| Required Tools | MSM Download Tool / SP Flash Tool / OPlus Flash Tool |
| Authentication | May need authorized service account or MTK Bypass |
Device Specifications
| Chipset | MediaTek Dimensity 1200 |
| Manufacturing Process | 6nm |
| CPU | Octa-core (1x3.0GHz Cortex-A78 + 3x2.6GHz Cortex-A78 + 4x2.0GHz Cortex-A55) |
| GPU | ARM Mali-G77 MC9 |
| RAM Options | 6GB / 8GB |
| Storage | 128GB (expandable via SD card) |
| Battery | 4500mAh with 60W charging |
| Display | 6.43 inch AMOLED 120Hz |
| Rear Camera | 64MP + 8MP + 2MP |
| Front Camera | 16MP |
What This Flash File Fixes
| Dead Unit | Revive completely non-responsive device |
| Boot Hang | Stop endless logo cycling at startup |
| Screen Lock | Remove pattern, PIN, password, or fingerprint |
| FRP Lock | Bypass Google account verification lock |
| Software Upgrade | Move to newer ColorOS builds |
| Software Downgrade | Roll back to previous version if needed |
| System Lag | Fix stutter and performance drops |
| Root Removal | Return to factory state after rooting |
| Warranty Return | Restore stock for official warranty support |
Stock ROM Advantages
| Unbrick Device | Revive completely dead or non-responsive phone |
| Fix Bootloop | Stop device stuck endlessly on logo screen |
| Version Change | Upgrade to newer build or downgrade to older stable version |
| Root Removal | Remove root access and return to factory state |
| Bug Elimination | Fix random glitches and system errors |
| Lag Fix | Remove stutter and improve system smoothness |
| Lock Removal | Erase forgotten pattern, PIN, or password |
| FRP Bypass | Remove Google account verification lock |
| Warranty Restore | Return to stock to regain official warranty coverage |
Key Features of Oppo K9 Pro
| Dimensity 1200 | 6nm flagship-level processor |
| 4500mAh Battery | Decent battery capacity for all-day usage |
| 60W SuperVOOC Charging | Fast charging - full charge in minutes |
| 120Hz AMOLED Display | 6.43 inch FHD+ AMOLED with 120Hz refresh rate |
| 64MP Camera | Triple camera setup with 64MP main sensor |
| 5G Connectivity | Next generation network connectivity |
| SD Card Support | Dedicated microSD slot for storage expansion |
| ColorOS 11.3 | Feature-rich interface with customizations |
Pre-Flash Requirements
| Check Version First | Dial *#899# from emergency call screen to verify current build |
| Battery | Keep charge at 60 percent or above (4500mAh battery) |
| USB Cable | Original or high-quality data sync cable |
| USB Port | Use direct motherboard USB port for stability |
| Drivers | Install MediaTek USB VCOM drivers |
| Flash Tools | MSM Download Tool / SP Flash Tool / OPlus Flash Tool |
| Authorization | EDL access may require authorized service account |
| Backup Warning | All user data will be erased during process |
| Device Model | Confirm your device is PEYM00 - wrong firmware bricks phone |
| PC OS | Windows 10 or 11 64-bit recommended |
| Auth Bypass | May need MTK Bypass Tool for authentication |
Method 1 - Flashing Using MSM Download Tool (OPlus Tool)
| Step 1 | Download and extract firmware package (ZIP file) using 7-Zip or WinRAR |
| Step 2 | Install MediaTek USB drivers on your computer |
| Step 3 | Extract MSM Download Tool and run as administrator |
| Step 4 | Wait for tool interface to load completely |
| Step 5 | Click Import and select extracted firmware folder containing OFP file |
| Step 6 | Login with Oppo service account credentials (authorized account required) |
| Step 7 | Verify the firmware package before proceeding |
| Step 8 | Click Start All or Flash button to begin |
| Step 9 | Power off Oppo K9 Pro completely |
| Step 10 | Press and hold Volume Up and Volume Down keys together |
| Step 11 | Connect USB cable while holding both keys firmly |
| Step 12 | Device enters BROM/Preloader mode (screen stays black) |
| Step 13 | Tool detects phone and begins flashing automatically |
| Step 14 | Watch progress bar move from zero to one hundred percent |
| Step 15 | Wait for Download Complete or Pass success message |
| Step 16 | Disconnect USB cable from phone |
| Step 17 | Hold Power button 15 to 20 seconds to reboot device |
| Step 18 | First boot takes 5 to 10 minutes - be patient |
| Step 19 | All done - device is now restored |
Method 2 - Flashing Using SP Flash Tool
| Step 1 | Download and extract firmware package (ZIP file) |
| Step 2 | Install MediaTek USB VCOM drivers on your computer |
| Step 3 | Open SP Flash Tool as administrator |
| Step 4 | Click Scatter-loading and select the scatter.txt file from firmware folder |
| Step 5 | IMPORTANT: Untick preloader.bin during first flash to avoid hard brick |
| Step 6 | Select Download Only mode (not Format All) |
| Step 7 | Click Download button to begin |
| Step 8 | Power off Oppo K9 Pro completely |
| Step 9 | Press and hold Volume Up and Volume Down keys together |
| Step 10 | Connect USB cable while holding both keys firmly |
| Step 11 | SP Flash Tool will detect device automatically |
| Step 12 | Flashing starts automatically with yellow progress bar |
| Step 13 | Wait for green checkmark Download OK message |
| Step 14 | Disconnect USB cable from phone |
| Step 15 | Device will reboot automatically - if not, press Power button |
| Step 16 | First boot takes 5 to 10 minutes - be patient |
EDL/BROM Mode Detection
| Screen State | Blank black screen only (no display at all) |
| Device Manager | Look for MediaTek USB Port or Preloader device |
| Driver Issue | Unknown device shows when drivers missing |
| Key Combo Fail | Some units need test point method |
| Auth Bypass | May need MTK Bypass Tool for authentication |
Version Check Code
| Dialer Code | *#899# |
| Usage | Dial from emergency call screen to check current firmware version |
| Purpose | Verify device version before flashing to ensure compatibility |
Note About China ROM
| Region | China Domestic |
| Google Services | May not include full Google Play Store or GMS |
| Language | Default Chinese, English available |
| Bloatware | Includes China-specific apps |
| Global Users | May need to install Google services separately after flash |
| OTA Updates | Will receive China region OTA updates only |
| Model Note | PEYM00 is China variant - India variant is PEYM10 |
Important Warnings Before Flashing
| Warning 1 | Please backup all personal data before starting flashing process |
| Warning 2 | Logout from Oppo and Google cloud service account before flashing |
| Warning 3 | Turn off Find My Device or phone tracking feature |
| Warning 4 | Confirm flashing tool is latest version available |
| Warning 5 | Android 10 and newer software versions cannot be rolled back to older Android |
| Warning 6 | Rollback attempt will cause phone not to turn on |
| Warning 7 | Never disconnect USB cable during active flash operation |
| Warning 8 | IMPORTANT: Untick preloader.bin when using SP Flash Tool |
| Warning 9 | EDL flashing may require authorized Oppo service credentials |
| Warning 10 | Ensure correct firmware for PEYM00 model only |
Disclaimer
| Risk Statement | Flashing or unlocking operations are performed at your own risk |
| No Liability | We are not responsible for any mistakes that brick your device |
| Read Instructions | Review all flashing steps carefully before beginning the process |
| Correct File | Use firmware intended only for PEYM00 model |
| Driver Check | Ensure MediaTek drivers are properly installed |
| No Interruption | Do not disconnect USB cable or close tool during flashing |
| Warranty Void | Flashing may void device warranty |
| Preloader Warning | Unticking preloader is crucial for safety |
Download Information
| Provider | RomWala |
| Package Name | PEYM00domestic-11-F.10-2023032516080129 |
| Build Version | F.10 |
| Build Date | 25 March 2023 |
| Android Version | 11 |
| ColorOS Version | 11.3 |
| Region | China (Domestic) |
| Format | ZIP compressed archive (Scatter firmware) |
| Extraction Tool | 7-Zip or WinRAR |
| Includes | MSM Download Tool, SP Flash Tool, MediaTek Drivers |
| Direct Link | Provided below |
Search Tags
| Tag 1 | Oppo K9 Pro Flash File |
| Tag 2 | PEYM00 Stock ROM |
| Tag 3 | Dimensity 1200 Firmware |
| Tag 4 | ColorOS 11.3 ROM |
| Tag 5 | EDL Mode Flash Oppo |
| Tag 6 | FRP Bypass PEYM00 |
| Tag 7 | Pattern Unlock Oppo K9 Pro |
| Tag 8 | Dead Boot Repair Dimensity |
| Tag 9 | SP Flash Tool Guide |
| Tag 10 | Android 11 Oppo Update |
| Tag 11 | PEYM10 Stock ROM |
| Tag 12 | RomWala Flash File Download |
Oppo K9 Pro PEYM00 Flash File - Description
Download Oppo K9 Pro (PEYM00) official flash file version F.10 with ColorOS (Android 11). Powered by MediaTek Dimensity 1200 (6nm). 4500mAh battery with 60W fast charging. Flash via EDL mode using MSM Download Tool or SP Flash Tool. Fix dead boot, pattern lock, FRP. Direct link below.
Tags:
#OppoK9Pro #PEYM00 #Dimensity1200 #ColorOS #EDLFlashFile #StockROM #DeadBootFix #FRPBypass #OppoFlashFile #MSMDownloadTool #SPFlashTool
Tags:
#OppoK9Pro #PEYM00 #Dimensity1200 #ColorOS #EDLFlashFile #StockROM #DeadBootFix #FRPBypass #OppoFlashFile #MSMDownloadTool #SPFlashTool
Comments (0)