How do I download this firmware or repair file?

Click the Download button below the selected file. Once completed, your direct high-speed download link and extraction password (if any) will be generated instantly.

Where can I get support for flashing or unlocking?

You can reach out to our WhatsApp Helpdesk or join our Telegram community for technician support and flashing guides.

Realme C75 (RMX3941) MT6768 – Original Preloader, NVRAM & NVDATA Files

Q: Is Realme C75 (RMX3941) MT6768 – Original Preloader, NVRAM & NVDATA Files tested and verified?

Yes, all files and firmware hosted on RomWala are 100% verified and tested on working devices by mobile technicians.

103 views

0 downloads

0.0 (0)

Available Downloads

Loading files...

Full Specifications

Realme C75 RMX3941 Original NVRAM Pack

Description	Original Preloader, NVRAM, and NVDATA partition files for Realme C75 4G (model RMX3941). These files contain factory calibration data, IMEI structure, MAC addresses, and device-specific security keys. Essential for restoring null IMEI, unknown baseband, and network issues after flashing or hardware repair.
Device Name	Realme C75 4G
Brand	Realme
Model	RMX3941
Chipset	MediaTek MT6768 / Helio G92 Max
CPU	Octa-core (2x 2.0GHz Cortex-A75 + 6x 1.8GHz Cortex-A55)
GPU	ARM Mali-G52 MC2
RAM Options	4GB / 6GB / 8GB LPDDR4x
Storage Options	64GB / 128GB eMMC 5.1
Partitions Included	Preloader, NVRAM, NVDATA, Protect1, Protect2, SecCFG
Purpose	IMEI repair, Baseband fix, Network calibration, NVRAM restore, Dead boot recovery
Flash Tools	SP Flash Tool, MTK Client, Pandora Box, UnlockTool, CM2
File Type	Binary dump (.bin) or Scatter-based archive
Working Status	Requires matching firmware version

Device Specifications

Chipset	MediaTek MT6768 / Helio G92 Max
Manufacturing Process	12nm
CPU	Octa-core (2x 2.0GHz Cortex-A75 + 6x 1.8GHz Cortex-A55)
GPU	ARM Mali-G52 MC2 (800MHz)
RAM Options	4GB / 6GB / 8GB LPDDR4x
Storage Options	64GB / 128GB eMMC 5.1
Expandable Storage	Yes, microSDXC (dedicated slot)
Battery Capacity	5000mAh Li-Po non-removable
Charging Support	45W SuperVOOC fast charging
Display	6.72 inches IPS LCD, 120Hz refresh rate
Display Resolution	FHD+ 2400 x 1080 pixels
Network	4G LTE Dual SIM
Rear Camera	50MP + 2MP (depth) + 2MP (macro)
Front Camera	8MP
Audio	3.5mm jack, dual speakers
Fingerprint	Side-mounted
Dimensions	165.7 x 76.2 x 7.8 mm
Weight	186g
OS	Realme UI 6.0 (Android 14)

What These Partition Files Do

Preloader	First-stage bootloader, essential for BROM mode and flashing
NVRAM	Stores IMEI, WiFi/BT MAC, serial number, factory calibration data
NVDATA	Additional NV parameters, modem configuration, network settings
Protect1 / Protect2	Protected partitions containing security data
SecCFG	Security configuration (SBC, SLA, DAA flags)
Restore IMEI	Write back original IMEI numbers
Fix Baseband	Resolve 'Baseband Unknown' issue
Network Calibration	Recalibrate after IC or RF component replacement

Why Need Original NVRAM

Problem 1	IMEI null after flashing custom ROM or firmware
Problem 2	Baseband unknown / No network signal
Problem 3	WiFi and Bluetooth MAC address 02:00:00:00:00:00
Problem 4	Dead boot after wrong preloader flash
Problem 5	NVRAM corrupted by malware or failed OTA
Solution	Original NVRAM/NVDATA restore brings back factory calibration

Requirements Before Flashing

Battery	Keep charge at 60% or above (5000mAh)
USB Cable	Original or high-quality data cable
USB Port	Use direct motherboard USB 2.0 port
Drivers	Install MediaTek USB VCOM drivers (v3.0.1504 or newer)
Flash Tools	SP Flash Tool v5.2116+, MTK Client, or Pandora Box
Auth Bypass	MTK Bypass Tool for SLA/DAA (if needed)
Backup First	Take full firmware backup before writing NVRAM
Device Model	Confirm your device is RMX3941 (not C75 5G)
PC OS	Windows 10 or 11 64-bit
Firmware Match	NVRAM from same software version

Extraction Methods - From Working Phone

Method 1 - MTK Client	Free tool, read NVRAM via BROM mode
Method 2 - SP Flash Tool Read Back	Read entire flash, then extract partitions
Method 3 - Pandora Box	Professional tool, direct dump of NVRAM/NVDATA
Method 4 - UnlockTool	Read partitions in Mediatek tab
Method 5 - Root + DD Command	If phone rooted, use dd if=/dev/block/...
Important	Backup ALL partitions before writing anything

Flashing Steps - Using SP Flash Tool

Step 1	Download and extract the NVRAM package
Step 2	Install MediaTek USB VCOM drivers
Step 3	Run MTK Bypass Tool (if SLA/DAA enabled)
Step 4	Open SP Flash Tool as administrator
Step 5	Load scatter file from stock firmware (not from NVRAM zip)
Step 6	Uncheck all partitions except NVRAM, NVDATA, Protect1, Protect2
Step 7	Click 'Download' button
Step 8	Power off Realme C75 completely
Step 9	Press Volume Up or Volume Down (varies by tool)
Step 10	Connect USB cable while holding key
Step 11	Device enters BROM mode (screen black)
Step 12	SP Flash Tool will auto-detect and flash
Step 13	Wait for green checkmark 'Download OK'
Step 14	Disconnect USB, reboot device
Step 15	Check IMEI with *#06#

Flashing Steps - Using MTK Client

Step 1	Open MTK Client (Python tool)
Step 2	Connect phone in BROM mode
Step 3	Run 'python mtk r nvram nvram.bin' to backup current
Step 4	Run 'python mtk w nvram nvram.bin' to write new
Step 5	Repeat for nvdata, protect1, protect2
Step 6	Reboot phone and verify

After NVRAM Restore - Important Steps

Step 1	Reboot device after writing partitions
Step 2	Dial *#06# to verify IMEI numbers
Step 3	Check Settings > About Phone > Status for baseband
Step 4	Test WiFi and Bluetooth connectivity
Step 5	If IMEI still null, use SN Write Tool or Maui META
Step 6	Network calibrate if signal issues persist

IMEI Repair After NVRAM Flash

Tool 1	SN Write Tool (Smart Phone Flash Tool)
Tool 2	Maui META Tool (for MT6768)
Tool 3	Modem META Tool
Process	Write IMEI to MD1_DB and NVRAM partitions
Verify	Dial *#06#, both IMEI slots should show numbers
Note	Keep original IMEI from phone box

BROM Mode Detection for Realme C75

Screen State	Completely black screen, no vibration
Device Manager	Shows 'MediaTek USB Port (COMx)' or 'Preloader'
Key Combo	Volume Up + Power (then release power) OR Volume Down
Auto Exit	BROM mode exits after ~10 seconds without tool
Driver Issue	Unknown device shows if drivers missing
Realme Specific	After 2023 models, need auth bypass

Important Warnings

Warning 1	Use NVRAM from SAME firmware version only
Warning 2	Wrong NVRAM = no network or dead IMEI
Warning 3	Always backup original NVRAM first
Warning 4	IMEI modification is illegal in many countries
Warning 5	Use only on RMX3941 - wrong model bricks device
Warning 6	Never disconnect USB during write operation
Warning 7	Professional use only - DWYOR

Troubleshooting Common Issues

Device Not Detected	Reinstall MediaTek drivers, use USB 2.0 port
Auth Error (SLA/DAA)	Use MTK Bypass Tool or latest SP Flash Tool
IMEI Still Null	Write IMEI separately via SN Write Tool
Baseband Unknown	Flash modem partition from stock firmware
WiFi MAC Still Zero	NVRAM not written correctly, retry
Phone Not Booting	Restore original preloader from stock ROM
S_BROM_CMD_SEND_DA_FAIL	Use older SP Flash Tool version (v5.1924)

Tools Compatibility

SP Flash Tool	Free - needs auth bypass for newer Realme
MTK Client	Free - best for NVRAM read/write
Pandora Box	Professional - direct support for RMX3941
UnlockTool	Professional - NVRAM backup/restore
CM2 (Miracle Box)	Professional - full flash dump
SN Write Tool	Free - for IMEI writing after NVRAM restore

Disclaimer

Risk Statement	All operations at your own risk (DWYOR)
No Liability	We are not responsible for bricked devices
Read Instructions	Review all steps carefully before starting
Correct File	Use files only for RMX3941 model
Professional Use	For experienced service technicians only
No Interruption	Do not disconnect during write operation
Warranty Void	Flashing may void device warranty
Legal Note	IMEI modification may violate local laws

Search Tags

Tag 1	Realme C75 NVRAM backup
Tag 2	RMX3941 preloader file
Tag 3	MT6768 NVDATA repair
Tag 4	Realme C75 IMEI repair
Tag 5	Baseband fix Realme C75
Tag 6	MTK Client NVRAM restore
Tag 7	SP Flash Tool Realme C75
Tag 8	Pandora Box RMX3941
Tag 9	Helio G92 Max NVRAM
Tag 10	Realme C75 dead boot fix