How do I download this firmware or repair file?

Click the Download button below the selected file. Once completed, your direct high-speed download link and extraction password (if any) will be generated instantly.

Where can I get support for flashing or unlocking?

You can reach out to our WhatsApp Helpdesk or join our Telegram community for technician support and flashing guides.

Redmi 12C Earth Flash File Download(Convert Global Lock Bootloader Tested)

Q: Is Redmi 12C Earth Flash File Download(Convert Global Lock Bootloader Tested) tested and verified?

Yes, all files and firmware hosted on RomWala are 100% verified and tested on working devices by mobile technicians.

82 views

0 downloads

0.0 (0)

Available Downloads

File Name	Downloads	Action
earth_cn2gl_no_need_bootloader_unlock_KhantSithuWin_14.0.rar (5.2G)	0	Login

Full Specifications

Fastboot Flash Update Guide

Step 1 – Download Flash Tool	Download and install the newest version of Mi Flash Tool on your computer. Use the official application that supports Xiaomi Fastboot mode.
Step 2 – Download Firmware Fastboot	Choose the Fastboot firmware that matches your device region, such as: Global, EEA, India, China, Indonesia. Ensure the firmware file has a .tgz extension. If the file is still in .gz format, rename it to .tgz before extracting.
Step 3 – Enter Fastboot Mode	Turn off the device completely. Press and hold Volume Down + Power buttons at the same time. After entering Fastboot Mode, connect the device to your PC using a USB cable.
Step 4 – Extract Firmware	Extract the downloaded firmware using WinRAR or 7-Zip. Open the extracted firmware folder. Copy the folder path location.
Step 5 – Flash Firmware via Mi Flash Tool	Install and launch the MiFlash application. Paste the firmware folder location into the MiFlash path field. Click the Refresh button so the device gets detected. Once the device appears, click the Flash button to start the flashing process.
Step 6 – Wait Until Finished	The flashing process will take several minutes. If the progress bar turns green and Success status appears, the flashing is successful. The device will automatically restart to the new system.

Additional Notes

1	If MiFlash fails to detect your device, reinstall Xiaomi or Qualcomm drivers.
2	For certain device models, flashing can only be performed after unlocking the bootloader.
3	It is recommended to use a USB port directly from the PC motherboard for a more stable connection.

Warning

see	Any risk of damage caused by flashing errors is the sole responsibility of the user. Do at your own risk.

Required Drivers

driver1	Xiaomi USB Driver - Required for all Xiaomi devices
driver2	Qualcomm HS-USB QDLoader 9008 Driver - For Qualcomm chipset devices
driver3	Google USB Driver - For ADB and Fastboot commands
driver4	MediaTek VCOM Driver - For MediaTek chipset devices

Driver Installation Steps

step1	Download the Xiaomi USB Driver file from official source
step2	Extract the downloaded .rar or .zip file using WinRAR
step3	Open Device Manager by right clicking on This PC > Manage > Device Manager
step4	Locate your device showing as unknown or with yellow mark
step5	Right click and select Update driver
step6	Choose Browse my computer for drivers
step7	Select the extracted driver folder and click Next
step8	Wait for installation to complete
step9	Restart your PC after installation

Qualcomm Driver Installation

step1	Download Qualcomm HS-USB QDLoader 9008 driver
step2	Run the setup.exe file as Administrator
step3	Follow the on-screen instructions (Next > Next > Install)
step4	Click Finish when done
step5	Restart your computer

MediaTek Driver Installation

step1	Download SP Flash Tool which includes MTK drivers
step2	Open the driver folder inside SP Flash Tool
step3	Run MTK_Driver_Auto_Installer.exe as Administrator
step4	Click the Install Driver button
step5	Wait for success message
step6	Restart your computer

Before Driver Installation Tips

tip1	Disable Windows Driver Signature Enforcement if required
tip2	Remove any old or conflicting drivers first
tip3	Always run installer as Administrator
tip4	Use a good quality original USB cable
tip5	Connect to USB 2.0 port directly on motherboard
tip6	Restart PC after every driver installation

How to Check Driver is Working

method1	Open Device Manager while device is connected in Fastboot mode
method1_result	You should see Android Phone or Kedacom USB Device without yellow mark
method2	Open Command Prompt and type: fastboot devices
method2_result	If a device serial number appears, driver is working properly
method3	Open Mi Flash Tool and click Refresh
method3_result	Your device COM port or device ID should appear in the list

Troubleshooting Driver Issues

problem1	Device shows as Unknown in Device Manager
solution1	Manually install driver by pointing to the extracted driver folder
problem2	Driver Signature Error appears on Windows 10 or 11
solution2	Disable driver signature enforcement from Advanced Startup options
problem3	MiFlash does not detect device after clicking Refresh
solution3	Change USB port, reconnect cable, restart MiFlash, or restart PC
problem4	Device is stuck in Fastboot mode
solution4	Press and hold Volume Down + Power for 10-15 seconds to restart
problem5	Yellow exclamation mark in Device Manager
solution5	Uninstall the driver, restart PC, then reinstall fresh driver

How to Disable Driver Signature Enforcement Windows 10 and 11

step1	Open Settings > Update & Security > Recovery
step2	Under Advanced startup, click Restart now
step3	After restart, click Troubleshoot
step4	Click Advanced Options
step5	Click Startup Settings
step6	Click Restart
step7	Press 7 or F7 on keyboard for Disable driver signature enforcement
step8	PC will restart. Now install drivers normally

Pre-Flashing Checklist

check1	Xiaomi USB Driver installed and working
check2	Device can enter Fastboot mode successfully
check3	Mi Flash Tool installed on PC
check4	Correct Fastboot firmware .tgz file downloaded
check5	Firmware extracted to a folder
check6	Original USB cable available
check7	Battery level above 50 percent
check8	Important data backed up (all data will be erased)
check9	Bootloader unlocked if required for your model
check10	PC running as Administrator

Final Summary

summary

First install Xiaomi USB Driver and Qualcomm or MediaTek drivers. Restart your PC. Then open Mi Flash Tool, paste firmware path, click Refresh, and start flashing. If device is not detected, disable driver signature enforcement and reinstall drivers.

Redmi 12C Earth Flash File Download(Convert Global Lock Bootloader Tested) - Description

Tested firmware for Redmi 12C Earth used for global ROM conversion and bootloader lock
Helps fix software issues improve stability and restore complete system performance
Redmi 12C firmware earth stock ROM global convert repair solution

Firmware ROM Information

Model Perangkat: Redmi 12C
Code Name: earth
Jenis File: Custom / Modified Fastboot ROM
Fungsi: China to Global Convert, Safe Bootloader Relock
Flash Tool: Mi Flash Tool
Status: 100% Tested Working

Flashing Instructions:

Important: Your Redmi 12C (earth) must already be in Unlock Bootloader (UBL) status before starting this process.

Download and extract the firmware on your PC
Power off the device and enter Fastboot Mode (Volume Down + Power)
Connect the phone to PC using a good quality USB cable and open Mi Flash Tool
Click Select and choose the extracted firmware folder
In the bottom options of MiFlash Tool, select Clean all and lock to erase all data and automatically relock the bootloader
Click Flash and wait until the process shows green Success status

Note:
Use this firmware carefully. Do not use Clean all and lock with standard Global ROMs on China variant devices. This modified ROM is specially prepared to support safe relocking

#Redmi12C #Earth #Firmware #GlobalConvert #BootloaderLock #StockROM #FlashFile #AndroidRepair #TestedFirmware #MobileRepair