How do I download this firmware or repair file?

Click the Download button below the selected file. Once completed, your direct high-speed download link and extraction password (if any) will be generated instantly.

Where can I get support for flashing or unlocking?

You can reach out to our WhatsApp Helpdesk or join our Telegram community for technician support and flashing guides.

Samsung A14 SM-A145P UT File Dump | Fix Dead Boot Tested 100% Working

Q: Is Samsung A14 SM-A145P UT File Dump | Fix Dead Boot Tested 100% Working tested and verified?

Yes, all files and firmware hosted on RomWala are 100% verified and tested on working devices by mobile technicians.

46 views

0 downloads

0.0 (0)

Available Downloads

Loading files...

Full Specifications

Samsung Galaxy A14 SM-A145P Deadboot Repair Package

Overview	This repair package is prepared for Samsung Galaxy A14 SM-A145P devices affected by severe software damage such as dead boot, failed OTA update, bootloop, or corrupted boot partitions
Purpose	The UnlockTool dump file helps restore the initial boot partitions while the official firmware completes the full Android system recovery process
Testing Status	The dump and firmware package have been tested successfully for deadboot and hard brick repair operations
Main Advantage	Useful for reviving devices that no longer boot normally after failed flashing or software corruption

System & Firmware Information

Brand	Samsung
Device Model	Samsung Galaxy A14
Model Number	SM-A145P
Device Name	a14mnnxx / a14m
Chipset Platform	MT6768 Mediatek Helio G80
Firmware Version	A145PXXU1AWD1 / A145PXXU1AWC5
Android Version	Android 13 SDK 33
Security Patch	2023-04-01
Build ID	SP1A.210812.016
File System	EROFS and F2FS
Main Function	Deadboot Repair, Hard Brick Recovery, Boot Partition Restore, Full Firmware Flashing

Quick Deadboot Repair Guide

Step 1	Download and extract both the UnlockTool dump package and official firmware using the latest WinRAR version
Step 2	Open your preferred repair software such as UnlockTool
Step 3	Navigate to the Mediatek MTK section and load the dump scatter file together with all required partition files
Step 4	Power off the Samsung Galaxy A14 completely
Step 5	Press and hold both Volume Up and Volume Down buttons while connecting the USB cable to enter BROM mode
Step 6	Wait until the dump writing operation completes successfully with a Passed message
Step 7	Disconnect the USB cable after the initial repair process finishes
Step 8	The phone may only vibrate or remain on the logo screen temporarily after the dump repair
Step 9	Continue with full official firmware flashing using Odin or the Flash section inside UnlockTool
Step 10	Load the downloaded firmware files and begin the installation process
Step 11	Wait until the flashing operation reaches 100 percent and the device restarts automatically
Step 12	Allow the phone several minutes to complete the first Android boot process

Technical Warning

Disclaimer	Low-level partition repair and firmware rewriting procedures require proper technical knowledge and compatible repair tools
Risk Notice	Any additional device damage, permanent deadboot condition, or software failure caused by incorrect repair execution is fully the responsibility of the technician